Troubleshooting & Help
- Three.2 Crossover settings (bypass and normal)
- There is no output on the channel 3/sub output on my LC6i/LC7i/LCQ-1
- My AudioControl line converter suddenly will no longer turn on
- My Line out Converter stays on after the car turns off when using the GTO signal sense
- After installing your line out converter my door chimes are VERY loud!
- I just hooked up the Epicenter, but it’s only outputting low muffled noise.
- The GTO signal sense is not turning on my line converter/processor
- The protection and/or Power LED is flashing on my Epicenter 600/1200
- The “Connected to Main” lights will intermittently turn on on my DQ-61 and the sub channel will then go out?
- My stereo only sounds correct when my doors are open and/or my subwoofer acts erratically.
- I have no audio from my Line Output Converter but it is powered on
- The "Maximized" light stays on all the time!
- Audible hiss coming through the speakers after installing AudioControl products
- Failed to load driver error for DM Smart DSP software