AC LGD’s: Do your line converters put a resistor load on the speaker outputs of my factory amp?

Only the PRO Series LC line converters have LGD's built into them. All other products DO NOT have LGD's internal to them.

A lot of newer vehicles factory systems MUST see a resistance on the outputs in order to work properly.

If they don’t see a resistance, there are a number of different ways the system may react.

The most common is that it will not output any signal at all. Or, it may output distorted signals, or will send random noise to specific channels.  The worst case scenario is that the amp will see no resistance at all and it will just send all of its power out all at once, which typically results in burning up your after market amp.

The work around for this is to put resistors on the inputs of the line converter.

For further information, please see the knowledge base article here!

Our LC1i and LC2i PRO line converters have our load generating technology built in.

Individual AC LGD information: 

AC LGD (Blue)

AC LGD 20 for Dodge/Jeep/Chrysler (Green)

AC LGD 60 for Dodge/Jeep/Chrysler (Gray)