How to update firmware for the DM-608 / DM-810 processors and D-6.1200 / D-4.800 amplifiers. Please review the installation instructions before proceeding.
Note: The new firmware is installed by re-installing the DM Smart DSP software on your computer. Completely uninstall any current versions of the software before downloading and installing the new version. Also make sure your computer is connected to the AudioControl processor or DSP amp via the USB cable and that the processor or DSP amp is powered on before you start the software/firmware installation.
Here are links to instructions for installing the software/firmware for:
Windows
Mac
You can download the new firmware version via this Link
DM Smart DSP Downloads
Once you install the new software/firmware then login to the processor and check the Firmware version in your unit by going to the HELP drop down menu and select ABOUT.
Instructions for connecting via the optional AC-BT24 Bluetooth module:
Streaming Audio
DM Smart DSP Mobile Application Setup
If you need additional assistance, please contact Technical Support here!
Comments
0 comments
Article is closed for comments.